Cyanide copper plating is the earliest and most widely used copper plating process. The plating bath mainly consists of copper cyanide complex and a certain amount of free cyanide, which is strongly alkaline. Because the cyanide root has the very strong activation ability and the binding ability, therefore this kind of electroplating method first characteristic is the solution has the certain deoiling and the activation ability. Secondly, due to the use of a strong binding capacity of the cyanide plating solution, so that the complex ion discharge is not easy. Thus, the cathode polarization of the bath is very high, with excellent uniform plating capacity and covering capacity. The color surface generally has the red copper, the brass, the bronze, if in these three colors in addition to the drawing process will produce the red bronze, the bronze, the brass these three different colors. Widely used in high-end leisure venues, Star hotels, luxury counters, luxury doors. For All kinds of body and coating needs, with different special "water plating" solution, being plated parts at room temperature (15-40 degrees) , placed in the water plating solution, for a slight shake, in a short time (such as plating, only 30 seconds) can be completed. CHARACTERISTICS OF WATER PLATING PROCESS: 1. Do not need heat source, in 15-40 degrees of normal temperature conditions for a variety of housing plating work. 2. Its principle is not to cover, but to make the housing and substrate alloy, the bonding strength of greatly increased it is noteworthy that: 201 Stainless Steel Black Titanium plating effect than deep black, black electroplating
